Kyoritsu 2413R Leakage Clamp Meter

 Leakage Clamp Meter Kyoritsu 2413R

The True RMS capability of the Kyoritsu 2413R Leakage Clamp Meter enables accurate measurement of distorted waveforms.

• Large transformer jaws of 68mm diameter makes it possible to clamp on all three or four wires (3 phases) together for leakage current measurement.
• Measurement from mA up to AC 1000A
• Frequency filter switch to eliminate the effect of the harmonics.
• 2 way analogue output terminal: AC current detected by transformer jaws is converted to AC and DC voltage. Output cord model 7073 (option) is used for monitoring waveform with an oscilloscope or for connecting to a recorder.

 

Specification:

AC A(50/60Hz)

• 200mA/2/20/200/1000A
• ±2.5%rdg±5dgt (200mA/2/20A)
• ±3.0%rdg±5dgt (200A, 0~500A)
• ±5.5%rdg (501~1000A)

AC A(WIDE)

• 200mA/2/20/200/1000A 
• ±1.8%rdg±5dgt (50/60Hz) (200mA/2/20A)
• ±2.0%rdg±5dgt (50/60Hz) (200A, 0~500A)
• ±5.0%rdg (50/60Hz) (501~1000A)

Conductor Size Ø68mm max.

Frequency Response 40Hz~1kHz

Output

• Waveform : AC200mV against the maximum value of each range (1000A range is 100mV)
• Recorder : DC200mV against the maximum value of each range (1000A range is 100mV)

Crest Factor 3.0 or less

Withstand Voltage 3700V AC for 1 minute

Applicable Standard

IEC 61010-1 CAT.III 300V Pollution degree 2

IEC 61010-2-032

Power Source 6F22 (9V) × 1 *Continuous measuring time: Approx. 60 hours

Dimensions 250(L) × 130(W) × 50(D)mm

Weight Approx. 570g (including battery)

Accessories

9094 (Carrying Case)

6F22 × 1

Instruction Manual

Optional 7073 (2WAY Output Cord)

Informasi Dan Pemesanan Hub. Hary Nugroho  : 021.7318012 - 081806120636    Fax : 021.7318012  Email . alatsurveykita61@gmail.com