Kyoritsu 8115 New AC/DC Clamp Sensor

KYORITSU 8115

New AC/ DC Clamp Sensor

• Permits extension of the AC and DC current ranges of almost any Digital Multimeters ( DMMs) without breaking the circuit under test.
• Using KEW 8115 with KEW 1051/ 1052 ( DMM) the display can be set for direct reading in A.

Measuring range AC 0.1~ 130Arms ( 185Apeak) DC 0~ ± 180A
Output voltage AC 10mV/ A DC 10mV/ A
Accuracy ± 1.2% rdg± 0.4mV ( 50/ 60Hz)
± 2.5% rdg± 0.4mV ( 40~ 1kHz) ± 1.2% rdg± 0.4mV ( * )
Low battery warning 2.2V± 0.2V or less - Red LED flash
( 1.9V± 0.2V - Automatically power off)
Conductor size Max. ¦ 12mm
Withstand voltage AC 3540V ( RMS 50/ 60Hz) for 5 sec.
Operating temperature & humidity range -10 to 55º C, relative humidity 85% or less ( no condensation)
Output impedance Approx. 10© or less
Applicable standards IEC 61010-1 CAT.III 300V Pollution degree 2,
IEC 61010-2-032, IEC 61326-1
Power source DC3V ( size AAA alkaline battery LR03× 2pcs)
* Continuous use: approx. 40 hours
( Auto power off: approx. 20 minutes)
Cord length Approx. 1, 200mm
Output connector ¦ 4mm banana plug
Dimensions 127( L) × 42( W) × 22( D) mm
Weight Approx. 140g - 081806120636
Accessories Soft case, LR03× 2, Instruction manual
* This accuracy is defined after the completion of the Kew 8115 zero-adjustment whilst connected to a DMM.

Informasi Dan Pemesanan Hub. Hary Nugroho : 021.71601997 - 81806120636                             Fax : 021.7318012 Email . alatsurveykita61@gmail.com